Preparation before operation:
Operators need to undergo professional training to understand the working principle, performance characteristics, safety operating procedures, etc. of the aluminum cutting machine.
Check if the power supply, air source, hydraulic system, etc. of the aluminum cutting machine are normal.
Ensure that the surrounding environment of the aluminum cutting machine is clean, free of debris, and the operating area is unobstructed.
Select the appropriate saw blade based on the cutting material and check if the blade is securely installed.
Check if the cooling system is functioning properly and ensure sufficient cooling water.
Operation steps:
Turn on the power, start the aluminum cutting machine, and observe if the equipment is running normally.
Adjust parameters such as saw blade speed and cutting speed according to cutting requirements.
Place the aluminum material to be cut on the cutting platform, ensuring that the material is stable and firm.
Start cutting, observe the cutting process, and pay attention to the contact between the saw blade and the aluminum material.
Adjust the cutting position according to the cutting length to ensure cutting accuracy.
After cutting is completed, turn off the cutting power and remove the cut aluminum material.
Clean the aluminum cutting machine, inspect all parts of the equipment for damage, and perform daily maintenance and upkeep.
Attention:
During the operation, it is strictly prohibited to wear gloves, accessories, etc. to avoid accidents.
The operator needs to stand on the side of the aluminum cutting machine to avoid splashing and injuring people during cutting.
During the operation, it is strictly prohibited to touch moving parts such as saw blades and cutting platforms.
Non operators are strictly prohibited from operating the aluminum cutting machine to prevent accidents.
During the operation, if any abnormal situation is found, the operation should be stopped immediately, the cause should be investigated, and the fault should be eliminated.
During the cutting process, pay attention to observing the wear of the saw blade and replace the severely worn saw blade in a timely manner.
After the operation is completed, turn off the power, cut off the gas and water sources to ensure safety.
Maintenance and upkeep of aluminum cutting machine:
Regularly maintain and upkeep the aluminum cutting machine to ensure that it is in good condition.
Keep the operating area clean and prevent debris from entering the equipment.
After the operation is completed, clean up the site to ensure the normal operation of the equipment.